Explosion-proof controller for RC servo motor

The device allows your software to control up to 5 RC servo motors via a standard USB interface. Low power servo motors powered directly from the bus which allows the module to pilot a small servo without any additional connection.

The module can be used to pilot other devices currently used for RC models, such as speed controllers, light controllers, etc.

This device can be connected directly to an Ethernet network, to a WiFi network and to a GSM network using special adapters.

Note: To use the Ex controller for RC servo motor in a hazardous area, the device must be protected to at least IP 65, so it must be placed inside the enclosure.

Ex controller for RC servo motor don’t require any special drivers or software. Compatible with Windows, Mac OS, Android and Linux and easy to drive from a maximum of programming languages.

The Ex controller for RC servo motor is connected through an industrial USB 2.0 connector to an intrinsically safe barrier Ex USB 2.0.

The Ex controller for RC servo motor a “hot-plug” function which allows them to be connected and disconnected without stopping, shutting down or rebooting the system.

Specifications:

USB connector: micro-B

Width: 20mm

Length: 45mm

Weight: 5g

Channels: 5

Protection class, according to IEC 61140: class III

Supported Operating Systems: Windows, Linux, Mac OS, Android

Сompliance: IP 65, RoHS

Electrical Data:

Uo=5 V

Io=50 mА

Ui=5 V

Ii=50 mА

Ci=10 µF

Ex marking:

Ex ib I Mb

Ex ib IIC T6...T4 Gb X

Ex tb IIIC T85°C...135°C Db

Produced in accordance with IEC 60079-0, IEC 60079-11, IEC 60079-31

Normal operating temperature: 5°C to 40°C

Extended operating temperature*: -30°C to 85°C

*Note: The extended temperature range is defined based on components specifications and has been tested during a limited duration (1h). When using the device in harsh environments for a long period of time, we strongly advise to run extensive tests before going to production.

The scope of delivery implies:

Explosion-proof controller for RC servo motor